DIY Skull Mounting Bracket

I finally got around to making a skull mounting bracket ad putting the antelope on the wall. Last year I cleaned and ‘bleached’ an antelope skull to make a nice euro mount. I may eventually put a post up about cleaning and preparing a skull in the euro mount style, since everybody asks how I did it.
Euro  Mount Bracket
Anyway, I needed to make a mounting bracket for the antelope skull, So during a recent internet outage, I took a short break from work and finally made a bracket. I took a 3/4 inch wide scrap piece of steel, trimmed it to about 10 inches, and made a 20 degree bend near the middle. I ground the surface. to rough up the texture of the bracket, and painted matte black for a simulated wrought iron look.

I drilled two holes for matching black screws, and voila! An easy and professional looking, nearly free skull mounting bracket. It cost about 50 cents, and took less than 30 minutes to make.
DIY  Euro Mount  Bracket

Facebooktwittergoogle_plusredditpinterestlinkedinmail